Tighten the bolts securely before starting the motorcycle.This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. Slip On Mufflers. Reply. Before & After of drilling out the baffle of the muffler on a Yamaha VStar 950. Use the drill to cut holes into the secondary baffle surrounding the center exhaust pipe.Reinstall the slip on muffler onto the exhaust pipe, utilizing the same mounting locations. And I think a lot of riders like a good sounding output. Bike : 2009 V Star 250 You can put a bowling ball in an oven, but that don't make it a biscuit. How Do I Drill Out the Baffels in my 2007 Yamaha V-Star? If you simply drill holes in the end of it, it will improve the sound, but not effect your air balance.

Insert the hole saw into the end cone on the exhaust, which is the exhaust tip, and drill out … Discussion Threads about this mod: 9703.1 32099.1 35006.1 31526.1. Removing the baffles is no where near loud enough to to even make you consider hearing protection, at least not in my opinion. This is the part which will be removed.Insert the metal grinding bit into the drill and grind away the weld on the outside of the flat metal plate. Drill out those spot welds with the metal drill bits and the drill.Remove the remainder of the first baffle with the chisel and the hammer. And the best thing about it is that you don't have to re-jet your carbs.

If you have not done this yet, I would start with that.

When you have a minute, please post an introduction so we can get to know you a little better. It's pretty foool proff. Once its big enough it should fall out. 06-28-2013, 03:05 PM, #4. Thanks The idea of banging it out with the hammer did nto work so well for me, but the screwdriver opened the hole up and the baffle fell right out.Four wheels move the body. You have to take a long and thick screwdriver and hit it with a hammer on the outside end of the baffle. Find. Insert the 1-inch hole saw into the drill. A long screwdriverI tried that and its not working to well. I'll keep trying... My wife swears that I am doing this as a ploy to get her to give in and say just go get the exhaust that you want. Free shipping on many items | Browse your favorite brands | affordable prices. Remove the second baffle inside the exhaust with the 24-inch chisel, as well as the two small exhaust pipes located inside the overall exhaust assembly.Shine the flashlight down the exhaust pipe assembly and locate the third baffle plate. The only other thing I would recommend would be to drill out the air box, or replace the stock with a high flow after market air box. Yamaha V Star Forum; V Star Models; ... Hello.

To make the V-star louder, you can remove the stock baffles from the exhaust, along with all the sound-deadening from the exhaust assembly. Thanks to everyone who helped me. Wound up buying DG Hardkrome performance exhaust and rejetting the carbs, shimming up the needles, drilling out pilot screw plugs, dialing them in and got it to sound great.

Tighten the bolts securely before starting the motorcycle.This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. Slip On Mufflers. Reply. Before & After of drilling out the baffle of the muffler on a Yamaha VStar 950. Use the drill to cut holes into the secondary baffle surrounding the center exhaust pipe.Reinstall the slip on muffler onto the exhaust pipe, utilizing the same mounting locations. And I think a lot of riders like a good sounding output. Bike : 2009 V Star 250 You can put a bowling ball in an oven, but that don't make it a biscuit. How Do I Drill Out the Baffels in my 2007 Yamaha V-Star? If you simply drill holes in the end of it, it will improve the sound, but not effect your air balance.

Insert the hole saw into the end cone on the exhaust, which is the exhaust tip, and drill out … Discussion Threads about this mod: 9703.1 32099.1 35006.1 31526.1. Removing the baffles is no where near loud enough to to even make you consider hearing protection, at least not in my opinion. This is the part which will be removed.Insert the metal grinding bit into the drill and grind away the weld on the outside of the flat metal plate. Drill out those spot welds with the metal drill bits and the drill.Remove the remainder of the first baffle with the chisel and the hammer. And the best thing about it is that you don't have to re-jet your carbs.

If you have not done this yet, I would start with that.

When you have a minute, please post an introduction so we can get to know you a little better. It's pretty foool proff. Once its big enough it should fall out. 06-28-2013, 03:05 PM, #4. Thanks The idea of banging it out with the hammer did nto work so well for me, but the screwdriver opened the hole up and the baffle fell right out.Four wheels move the body. You have to take a long and thick screwdriver and hit it with a hammer on the outside end of the baffle. Find. Insert the 1-inch hole saw into the drill. A long screwdriverI tried that and its not working to well. I'll keep trying... My wife swears that I am doing this as a ploy to get her to give in and say just go get the exhaust that you want. Free shipping on many items | Browse your favorite brands | affordable prices. Remove the second baffle inside the exhaust with the 24-inch chisel, as well as the two small exhaust pipes located inside the overall exhaust assembly.Shine the flashlight down the exhaust pipe assembly and locate the third baffle plate. The only other thing I would recommend would be to drill out the air box, or replace the stock with a high flow after market air box. Yamaha V Star Forum; V Star Models; ... Hello.

To make the V-star louder, you can remove the stock baffles from the exhaust, along with all the sound-deadening from the exhaust assembly. Thanks to everyone who helped me. Wound up buying DG Hardkrome performance exhaust and rejetting the carbs, shimming up the needles, drilling out pilot screw plugs, dialing them in and got it to sound great.

Tighten the bolts securely before starting the motorcycle.This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. Slip On Mufflers. Reply. Before & After of drilling out the baffle of the muffler on a Yamaha VStar 950. Use the drill to cut holes into the secondary baffle surrounding the center exhaust pipe.Reinstall the slip on muffler onto the exhaust pipe, utilizing the same mounting locations. And I think a lot of riders like a good sounding output. Bike : 2009 V Star 250 You can put a bowling ball in an oven, but that don't make it a biscuit. How Do I Drill Out the Baffels in my 2007 Yamaha V-Star? If you simply drill holes in the end of it, it will improve the sound, but not effect your air balance.

Insert the hole saw into the end cone on the exhaust, which is the exhaust tip, and drill out … Discussion Threads about this mod: 9703.1 32099.1 35006.1 31526.1. Removing the baffles is no where near loud enough to to even make you consider hearing protection, at least not in my opinion. This is the part which will be removed.Insert the metal grinding bit into the drill and grind away the weld on the outside of the flat metal plate. Drill out those spot welds with the metal drill bits and the drill.Remove the remainder of the first baffle with the chisel and the hammer. And the best thing about it is that you don't have to re-jet your carbs.

If you have not done this yet, I would start with that.

When you have a minute, please post an introduction so we can get to know you a little better. It's pretty foool proff. Once its big enough it should fall out. 06-28-2013, 03:05 PM, #4. Thanks The idea of banging it out with the hammer did nto work so well for me, but the screwdriver opened the hole up and the baffle fell right out.Four wheels move the body. You have to take a long and thick screwdriver and hit it with a hammer on the outside end of the baffle. Find. Insert the 1-inch hole saw into the drill. A long screwdriverI tried that and its not working to well. I'll keep trying... My wife swears that I am doing this as a ploy to get her to give in and say just go get the exhaust that you want. Free shipping on many items | Browse your favorite brands | affordable prices. Remove the second baffle inside the exhaust with the 24-inch chisel, as well as the two small exhaust pipes located inside the overall exhaust assembly.Shine the flashlight down the exhaust pipe assembly and locate the third baffle plate. The only other thing I would recommend would be to drill out the air box, or replace the stock with a high flow after market air box. Yamaha V Star Forum; V Star Models; ... Hello.

To make the V-star louder, you can remove the stock baffles from the exhaust, along with all the sound-deadening from the exhaust assembly. Thanks to everyone who helped me. Wound up buying DG Hardkrome performance exhaust and rejetting the carbs, shimming up the needles, drilling out pilot screw plugs, dialing them in and got it to sound great.

• Home
• Inicio
• Linhas de Produtos
  • Colorimetria
  • W3 Organic
  • W3 Collor
  • W3 Evolution
  • Hidrat Power
• Blog
• Contato
• Loja Online
• Idioma: 
  •  Português
  •  English
  •  Français
  •  Español
  •  العربية